{pkgs, ...}: {
  sops.secrets."wireguard/private_key".owner = "root";

  networking.nat.enable = true;
  networking.nat.externalInterface = "ens3";
  networking.nat.internalInterfaces = ["wg0"];
  networking.firewall = {
    allowedUDPPorts = [993];
  };

  networking.wireguard.interfaces = {
    # "wg0" is the network interface name. You can name the interface arbitrarily.
    wg0 = {
      # Determines the IP address and subnet of the server's end of the tunnel interface.
      ips = ["10.8.0.1/24"];

      # The port that WireGuard listens to. Must be accessible by the client.
      listenPort = 993;

      # This allows the wireguard server to route your traffic to the internet and hence be like a VPN
      # For this to work you have to set the dnsserver IP of your router (or dnsserver of choice) in your clients
      postSetup = ''
        ${pkgs.iptables}/bin/iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
      '';

      # This undoes the above command
      postShutdown = ''
        ${pkgs.iptables}/bin/iptables -t nat -D POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE
      '';

      # Path to the private key file.
      #
      # Note: The private key can also be included inline via the privateKey option,
      # but this makes the private key world-readable; thus, using privateKeyFile is
      # recommended.
      privateKeyFile = "/run/secrets/wireguard/private_key";

      peers = [
        {
          # Pixel
          publicKey = "xMO5xTvBXtikri0WS9wpzGvSWITjkQV5oUOYwFjqB0g=";
          allowedIPs = ["10.8.0.69/32"];
        }
        {
          # Zephyrus
          publicKey = "TwXHVANaKZsvP/hfjkQXkLwCtFuDeDmQ2Q7jlaxl5SU=";
          allowedIPs = ["10.8.0.42/32"];
        }
      ];
    };
  };
}