pointfichiers/de/i3/scripts/bandwidth2

105 lines
3.1 KiB
Text
Raw Permalink Normal View History

2023-09-28 10:52:20 +02:00
#!/usr/bin/env bash
#
# Copyright (C) 2015 James Murphy
# Licensed under the terms of the GNU GPL v2 only.
#
# i3blocks blocklet script to monitor bandwidth usage
iface="${BLOCK_INSTANCE}"
iface="${IFACE:-$iface}"
dt="${DT:-3}"
unit="${UNIT:-KB}"
LABEL="${LABEL:-<span font='FontAwesome'> </span>}" # down arrow up arrow
printf_command="${PRINTF_COMMAND:-"printf \"${LABEL}%1.0f/%1.0f %s/s\\n\", rx, wx, unit;"}"
function default_interface {
ip route | awk '/^default via/ {print $5; exit}'
}
function check_proc_net_dev {
if [ ! -f "/proc/net/dev" ]; then
echo "/proc/net/dev not found"
exit 1
fi
}
function list_interfaces {
check_proc_net_dev
echo "Interfaces in /proc/net/dev:"
grep -o "^[^:]\\+:" /proc/net/dev | tr -d " :"
}
while getopts i:t:u:p:lh opt; do
case "$opt" in
i) iface="$OPTARG" ;;
t) dt="$OPTARG" ;;
u) unit="$OPTARG" ;;
p) printf_command="$OPTARG" ;;
l) list_interfaces && exit 0 ;;
h) printf \
"Usage: bandwidth3 [-i interface] [-t time] [-u unit] [-p printf_command] [-l] [-h]
Options:
-i\tNetwork interface to measure. Default determined using \`ip route\`.
-t\tTime interval in seconds between measurements. Default: 3
-u\tUnits to measure bytes in. Default: Mb
\tAllowed units: Kb, KB, Mb, MB, Gb, GB, Tb, TB
\tUnits may have optional it/its/yte/ytes on the end, e.g. Mbits, KByte
-p\tAwk command to be called after a measurement is made.
\tDefault: printf \"<span font='FontAwesome'> </span>%%-5.1f/%%5.1f %%s/s\\\\n\", rx, wx, unit;
\tExposed variables: rx, wx, tx, unit, iface
-l\tList available interfaces in /proc/net/dev
-h\tShow this help text
" && exit 0;;
esac
done
check_proc_net_dev
iface="${iface:-$(default_interface)}"
while [ -z "$iface" ]; do
echo No default interface
sleep "$dt"
iface=$(default_interface)
done
case "$unit" in
Kb|Kbit|Kbits) bytes_per_unit=$((1024 / 8));;
KB|KByte|KBytes) bytes_per_unit=$((1024));;
Mb|Mbit|Mbits) bytes_per_unit=$((1024 * 1024 / 8));;
MB|MByte|MBytes) bytes_per_unit=$((1024 * 1024));;
Gb|Gbit|Gbits) bytes_per_unit=$((1024 * 1024 * 1024 / 8));;
GB|GByte|GBytes) bytes_per_unit=$((1024 * 1024 * 1024));;
Tb|Tbit|Tbits) bytes_per_unit=$((1024 * 1024 * 1024 * 1024 / 8));;
TB|TByte|TBytes) bytes_per_unit=$((1024 * 1024 * 1024 * 1024));;
*) echo Bad unit "$unit" && exit 1;;
esac
scalar=$((bytes_per_unit * dt))
init_line=$(cat /proc/net/dev | grep "^[ ]*$iface:")
if [ -z "$init_line" ]; then
echo Interface not found in /proc/net/dev: "$iface"
exit 1
fi
init_received=$(awk '{print $2}' <<< $init_line)
init_sent=$(awk '{print $10}' <<< $init_line)
(while true; do cat /proc/net/dev; sleep "$dt"; done) |\
stdbuf -oL grep "^[ ]*$iface:" |\
awk -v scalar="$scalar" -v unit="$unit" -v iface="$iface" '
BEGIN{old_received='"$init_received"';old_sent='"$init_sent"'}
{
received=$2
sent=$10
rx=(received-old_received)/scalar;
wx=(sent-old_sent)/scalar;
tx=rx+wr;
old_received=received;
old_sent=sent;
if(rx >= 0 && wx >= 0){
'"$printf_command"';
fflush(stdout);
}
}
'